General：
35kV 630A T Cable Connector provides a fully screened and fully submersible
connection when mated with the proper bushing or plug. For connection of polymeric
cable to transformers, switchgear, motors, and other equipment with a premoulded
separable connector. Optional capacitive test point allows for an easy check of
the circuit status or installation of a fault indicator. These 36kV 630A T Cable
Connector are made by EPDM with the good quality
Description
Ratings Overview：
| Current Rating | |
| Continuous nominal current | 630A |
| 24hours overload | 1000A |
| Dynamic short circuit | 27kA/3s |
| 40kA/0.2s | |
Continuous Voltage Ratings：
| Description | Parameters (kV) |
| Continuous operating voltage | 35 |
| Maximum Rating Phase-to-Phase | 40.5 |
| Maximum Rating Phase-to-ground | 26 |
| AC withstand voltage,15min | 117 |
| DC withstand voltage,15min | 104 |
| Impulse withstand voltage | 200 |
| Minimum Corona Voltage Level | 26 |
Kit Contents：
- Deadbreak T Body
- Insulation
- Conductor cable lug
- Adaptor
- Two head screw
- Clearing Paper
- Silicone Lubricant
- Installation Instruction Sheet
- Quality Certificate
