Design of Internal Arc-Resistant Switchgear

The customer’s requirement is to pass an internal arc fault test with a 40kA 1s rating for a 17.5kV switchgear cabinet that is 650mm wide. Switchgear Cabinet Dimensions: Width: 650mm […]

Contactor Applications

Contactors find application in various scenarios where the switching on and off of loads is necessary during normal operations. These applications include medium voltage public lighting and industrial motors. The […]

Short-time withstand

Low and medium voltage electrical components of the electrical parameters, many are similar, such as short-time withstand current Icw, are required to switchgear in the case of short-circuit faults, due […]

Comparison of epoxy resin and ceramics

While there are many formulations of alicyclic epoxy resins and many varieties of ceramics, each with their own specific qualities and parameters, there are some general comparisons . First, in […]

Low Voltage Switchgear Basics

Complete sets of equipment for rated voltages not exceeding 1000V AC and 1500V DC, fixed or mobile, with or without enclosures One or more low-voltage switchgear and related control, measurement, […]

Medium and low voltage switchgear

Low and medium-voltage switchgear, customised to order requirements and according to specific electrical system diagrams. Engineering requirements vary and it is difficult to standardise and define products. Although the MNS […]

Double-Layer Cabinets in Medium-Voltage Switchgear

Double-layer switchgear is not a new concept; it dates back to the 1950s when the United States introduced metal-clad double-layer withdrawable switchgear. This innovative design featured two double circuit breakers, […]

What is contact box

Medium-voltage metal-clad withdrawable switchgear cabinets require a contact box. The so-called contact box is actually a common name in the industry for an insulating sleeve used to install static contacts […]